Products
Ludwig Bohrer Maschinenbau GmbH
Germany
    BOHRER Crate Washer Series TW

    6868

    67

    101

    Contact supplier
    Favorites Like

    Description

    Catalogues

    Videos

    BOHRER Crate Washer Series TW
    Double-end machine with immersion soaking bath and two cleaning levels located above this. The basic principle of having multiple cleaning levels with immersion soaking, main cleaning as well as intensive lye spraying, circulation re-spraying and a fresh water final rinse is the most effective way of cleaning crates and containers in a careful and cost-effective manner.


    The interior – optimised for servicing and cleaning
    Due to its clear design layout, which is well-lit and completely accessible, service and cleaning work can be carried out quickly and easily.

    Intensive spraying
    In combination with our turbulent immersion bath, the individual crates are thoroughly cleaned from all sides.
    For crates which are extremely dirty, we can additionally use special high pressure systems.


    The motor compartments – easily accessible and soundproof
    All units are installed in the motor compartments of the machine in a manner which ensures easy servicing. Large, pneumatic pivot doors make access easy.

    Continuous dirt discharge – for lengthy service life of the lye
    Labels and coarse dirt that have been removed are discharged from the bath via a continuously operating filter belt. The entire discharge unit can be completely removed for inspection.

    In comparison to conventional crate cleaning, this system offers
    45% savings on chemicals due to the length of time the chemicals are allowed to act on the crates
    Up to 40% savings on water due to the length of time the crates are allowed to stand in the machine
    Up to 33% savings on energy due to optimum insulation
    3-level cleaning system (BOTTOM-UP-SYSTEM) ensures high performance and minimal space requirements. (8-metre TW 80 is equivalent to a 24-metre conventional tunnel machine).
    Cleaning Level I
    Thorough soaking in the turbulent immersion soaking bath with full submersion for removing dirt from the entire crate, even from problem areas.
    Cleaning Level II / III
    Main cleaning via a long contact route. Intensive removal of the pre-soaked dirt by powerful water jets on all sides. In the upward turning unit, in particular, the front faces, interior compartments and base of the crates undergo intensive cleaning.
    Cleaning Level III
    At the end of the main cleaning section, following a short drainage zone, the crates are resprayed with clear circulating water and then rinsed with fresh water.
    The remaining required drainage occurs whilst the crates are still in the machine.
    Capacity:
    From 2,000 to 10,000 crates/h
    Other capacities on request



    Other
    Log in
    New to GM industry Sign up
    By signing up,you agree to our terms of use, privacy policy,and cookie policy
    have an account? Log in