Level measurement
Bopp & Reuther Messtechnik presents 2011, the new innovative level measurement known as an ideal complementary product to Ovalradserie. 

Level measurements complement ideally to flow measurements, since each flow is coming from a container or is pumped into a tank or container. For this the level information is extremely important because  through these pumps and valves can be controlled, so that the flow can be measured with high reliability. 

In case of emptying tanks, the pump power can be reduced, so that the risk of air in the pipes is reduced. This in turn would affect the measurement. During tank filling can by throttling the power of the pump a overfilling be avoided so that the full capacity of a tank can be exploited. 

The level measurement in combination with the flow measurement complement each other ideally, if the measured information are processed together and evaluated. The plant availability is held high, because in case of failure or maintenance of a measurement, the other still works.

Energy optimized, high-frequency electromagnetic impulses, generated by the electronics, are propagated along the probe (single rod probe, wire rope probe, coaxial probe). When these impulses hit the surface of the media, part of the impulse energy is reflected back up the probe to the electronics, depending on the reflection properties (dielectric). The level is calculated from the time difference between the impulse  sent and the impulses reflected. 

The sensor can output the analysed level as a continuous measurement reading through its current output, and it can convert the one value into a freely positionable switching output signal. 


--------------------------------------------------------------------------------
Advantages
• fast reaction time of 0,5 sec
• precise continuous level measurement and reliable point level detection combined in one device
• for liquids as well as powdery solids suitable
• no influences caused by tank / vessel internals 
• unmatched price/performance ratio


--------------------------------------------------------------------------------
Applications
• direct, precise and highly reliable continuous level measurement as well as point level detection 

in almost every liquid and solids –independent of changing process conditions (such as density, 

conductivity, temperature, pressure, vapour and turbulence)
• suitable for all types of process and storage tank applications

Level meter MG1 seriesTechnical specifications• threads G 3/4A, ¾” NPT (wrench size 32mm)
• accuracy ± 3mm or 0,03% of measured distance
  (reference conditions see product information)
• repeatability <2mm (reference conditions see product information)
• application temperature according to design -40°C to +150°C
• Druck -1 bis 40 barVariants• single rod probe / optional: PTFE coating
• wire rope probe
• coaxial probe
• standard or Ex version