MICRO BREWERY – two kettle brew house

Type: KB 125, to produce 125 liters of wort consists of:

Mobile base frame, made of stainless steel

with two steering and two fixed rolls ø100
cover plate with notch to hook in the brew kettle and space for the lauter tun,
drain DN 40 with tub under the brewery

Dimensions:

Width: approx. 1800 mm
Depth: approx. 800 mm
Working height: approx. 900 mm
Clearance height: approx. 120 mm

Construction:
brew kettle left
Control cabinet
Lauter tun right

Stainless steel brew kettle, capacity 155 liters

Hooked in the base frame
Isolated (around the brew kettle)
Electric heating elements
DN 40 butterfly valve at the bottom
Fixed piping DN32 between brew kettle and mash pump
Made of stainless steel
PT100 temperature sensor
Flat cover with handle
Agitator for brew kettle

Stainless steel lauter tun, capacity 155 liters

With four feet’s, to put it onto the base frame
Flat lid with handhold
Laser cut, slotted “false bottom” with centrically handle
Butterfly valve DN32
Blade to scarify grain filter bed and 2 liter mug for separation of first wort
The false bottom can be removed and then the lauter tun can be used as a fermenting vessel
With a special knife to cutting slits in the spent grains (for loosen)
Without isolation and cooling jacket of lauter tun vessel but this is optionally

Stainless steel mash / wort pump

Hanging at the brewery base frame with open impeller and special slip ring shaft sealing
at the deepest point with drain valve, for emptying the whole brewery

Single wort cooler

designed as soldered plate heat exchanger
made of stainless steel with connections and mash strainer DN 20 at the inlet to cool down the wort from approx. 95°C / 203°F to 20°C / 68°F
hidden mounted on the front of the base frame
with strainer for hops from the boiling

Control cabinet made of stainless steel

Mounted on the rear edge side of the base frame
With digital temperature controller from the brew kettle
The temperature which will be heated can be set, but without rest time
mode switch for heating of brew kettle (hand – O – automatic)
selector switch for heating stages
switch for mash / wort pump (Switches are removed with mash automatic touch panel)
optionally with frequency converter for the mash pump