CE
• FAST DELIVERY!
• Precision Micro-Machined Silicon Core
• 5-Point NIST Traceable Calibration
• High Stability, Low Drift
• Welded Stainless Steel Construction
• 316L SS Wetted Parts
• Now Available with M12 Connector,
Order Model PX459
(See Part Number Builder at bottom of page)
• Premium Temperature Performance
• Broad Compensated Temperature Range
• Durable, 1 Million Cycle Life
• Ruggedized with Secondary Containment
• Customized Specifications Available
Get all the great performance characteristics of the Micro-Machined Silicon Transducers in these wet/wet differential pressure models. These rugged stainless steel transducers are ideal for tough industrial automotive, or aerospace applications requiring a wet/wet transducer. They can be used in test benches, fitler monitoring, hydraulic, flow, or water/wastewater applications, as well as factory or pneumatic air, pitot tubes, air speed and other industrial or aerospace applications. The solid state silicon core and all stainless steel wetted parts will provide long, reliable service life with excellent long term stability.
COMMON SPECIFICATIONS
Accuracy: 0.08% BSL linearity, hysteresis and repeatability combined
Minimum Resistance Between Transducer Body and Any Wire: 100 MΩ
Operating Temperature:
mV/V and 5 to 10 Vdc Output: -45 to 121°C (-49 to 250°F)
mA Output: -45 to 115°C (-49 to 239°F)
Compensated Temperature Range:
10 inH2O to 5 psi: -17 to 85°C (1 to 185°F)
15 to 1000 psi: -29 to 85°C (-20 to 185°F)
Thermal Accuracy: Zero Span
% Span Shift over compensated temperature range
10 inH20 to 5 psi: ±1.00% ±1.00%
15 to 1000 psi: ±0.50% ±0.50%
Pressure Cycles: 1 million minimum
Long Term Stability (1-Year): ±0.1% FS typical
Bandwidth: DC to 1 kHz typical
Response Time: <1 ms
CE Complient: Meets EN61326-1: 2006 for industrial locations
Shock: 50 g, 11 ms, half-sine, vertical and horizontal axis
Vibration: 5-2000-5 Hz 30 minute cycle, Curve L Mil-Spec 810 figure 514-2-2, horizontal and vertical axis
Wetted Parts: 316L stainless steel
Line/Static Pressure: 500 psi max applied to both sides simultaneously
Proof Pressure (Differential):
10 inH2O range = 10 times range
1 psi range = 6 times range
2.5 to 750 psi ranges = 4 times range
1000 psi range = 3 times range
Hi Side Containment Pressure (Differential):
Ranges 10 inH2O to 5 psi: to 1000 psi
Ranges 15 to 1000 psi: to 3000 psi
Pressure Ports: ¼NPT male
Electrical Terminations:
PX409: 2 m (6') cable
PX409C: 2 m (6') cable with ½ NPT conduit thread
PX419: Mini-DIN (mating connector included)
PX429: Twist-lock, mating connector (sold separately)
PX459: M12 Connector, mating connector (sold separately)
Mating Connector for PX429: PT06F10-6S
Weight: 200 g (7 oz) max
UNI-DIRECTIONAL mV/V SPECIFICATIONS
Output: 10 mV/V ratiometric
Supply Voltage: 5 to 10 Vdc
Current Draw: 5 mA @ 10 Vdc
Input Impedance: 1000 to 5000 Ω
Output Impedance: 5000 Ω ±10% typical
Zero Balance:
Ranges ≤ 1psi: ±1% typ (2% max)
Ranges > 1psi: ±0.5% typ (1% max)
Span Setting:
Ranges ≤ 1psi: ±1% typ (2% max)
Ranges > 1psi: ±0.5% typ (1% max)
UNI-DIRECTIONAL VOLTAGE OUTPUT SPECIFICATIONS
Output Voltage/Supply Voltage: 0 to 5 Vdc/ 10 to 30 Vdc; 0 to 10 Vdc/15 to 30 Vdc (change "5V" to "10V" in model number)
Current Draw: 10 mA max
Maximum Current Output: 2 mA (= 2500 Ω min load resistance)
Output Impedance: 100 Ω
Zero Balance:
Ranges > 1psi: ±0.5% typ (1% max)
Ranges ≤ 1psi: ±1% typ (2% max)
Span Setting:
Ranges > 1psi: ±0.5% typ (1% max)
Ranges ≤ 1psi: ±1% typ (2% max)
UNI-DIRECTIONAL mA SPECIFICATIONS
Output: 4 to 20 mA
Supply Voltage: 9 to 30 Vdc; [9 to 20 Vdc above 105°C (229°F)]
Max Loop Resistance: (Vs-9) x 50 Ω
Zero Balance:
Ranges > 1psi: ±0.5% typ (1% max)
Ranges ≤ 1psi: ±1% typ (2% max)
Span Setting:
Ranges > 1psi: ±0.5% typ (1% max)
Ranges ≤ 1psi: ±1% typ (2% max)
Four Termination Styles are available:
PX409 = 2 m (6ft) cable
PX419 = mini-DIN connector
PX429 = Twist-Lock connector
PX459 = M12 connector
Contact supplier