SWECO Vibro-Energy Finishing Mills perform the complete spectrum of finishing parts from rough to delicate. Included are deburring, flash removal, edge-breaking, metal clean-up, rough surface work, prepaint finishing, descaling, burnishing, chemical treating, special surface effects, and the development of reflectivity. They are also ideal for ball burnishing. 

The Spiral Series contain mills with capacities ranging from 5 to 20 cubic feet. That's 1,500 to 6,000 pounds of load capacity. These mills can process parts as large as 18 inches long. The Batch Series provides both batch automatic and continuous finishing, depending on the process requirements. They can process parts with all types of media, including steel burnishing shapes plus ceramic and plastic preforms.
FMS-5LR

Capacity 5 ft³ (1500 lbs. load capacity)
Max Straight Part Length 12 inches
Motion Generator 5 hp, TENV, 1200 RPM, 3-phase 230, 460 or 575 volt. 60 Hz.
Vibralite Bowl Chamber - all cast polyurethane elastomer with 1" minimum thickness in high wear areas
Shipping Weight Approximately 1300 lbs. (including control panel)
FMS-14LR

Capacity 14 ft³ (4200 lbs. load capacity)
Max Straight Part Length 14 inches or more, depending on part cross-section and batch size
Motion Generator 10 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz.
Lining Abrasion-resistant lining of cast polyurethane with ¾" minimum thickness in high wear areas.
Shipping Weight Approximately 3800 lbs. (including control panel)
FMS-20LR

Capacity 20 ft³ (6000 lbs. load capacity)
Max Straight Part Length 18 inches or more, depending on part cross-section and batch size
Motion Generator 20 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. Recirculating oil lubrication system.
Lining Abrasion-resistant lining of cast polyurethane with 1" minimum thickness in high wear areas.
Shipping Weight Approximately 6500 lbs. (including control panel)