Introduction to the advantage of the transportation system
1) the company produced lose bottle line with German KHS Ag existing transmission bottle line in the same basic structure, stainless steel material, size, appearance, structure, parts interchangeability, in the production process, operation performance, stability and noise index is very close.
2) side panel material is stainless steel 304 2B board, appearance (appearance) matte polishing, thickness equal to or larger than 2.5 mm, width for 200 mm, after bending, folding, panel width of 175 mm than the same industry suppliers, the whole line is more durable and inner lining block are connected and assembled parts are made of stainless steel. The rung with 3 mm stainless steel plate bending, ensure thickness, spacer and rails are connected firmly. The column diameter 32, putting all the diameters of 14. Pad with 1.5 mm stainless steel, through the process of stretching into "M" type, or 6 mm x 304 mm 30 stainless steel forming parts. The frame, the connecting frame adopts hydraulic press punching stretching into "L", 270 mm *110 mm*3mm material specifications, using 4 bolts connection. Foot machine pipe is made of a stainless steel tube with the diameter of 50*2.0mm (supporting leg wall thickness is equal to or more than 2.0mm), foot tube connecting parts and the connecting bracket stamping welding assembly, the whole line frame a uniform appearance. In addition, the use of stamping parts hold climbing (card fixing type) and the upper and the lower transverse tube each pull, consistent appearance, make the whole line more steady, firm, the bearing seat with a plastic cover. These features are the exclusive design of Xiangshan day fish company.
3) the previous transmission difficult cleaning bottle machine, the main problem is connected between the water wheel and the side panel distance is too small, sewage and sediment backlog in the water receiving disc, operator can not be easy to clean, and is provided with a water receiving disc hook, barrier cleaning inconvenience. Our bottle conveying machine in structure and the water receiving disc can be adjusted 150mm-350mm, water board on the leg crosspiece rod and the hook joint water board, on both sides of the height of 40 mm, fold increase rigidity, on both sides of the water receiving plate than the plate beyond 30 mm (unilateral), water receiving plate and the water receiving plate by welding or take into the screw type fixed connected to each other, to ensure that no water, no drip, convenient cleaning, clean and fast.
4) all axes are made of stainless steel 2Cr13, eight more than the drive shaft and the driven shaft diameter 45mm, eight columns following the drive shaft and the driven shaft diameter 40mm, more than 12 columns of the spindle with Cr17Ni2 (Cr, Ni) and tempering. Supporting wheel diameter 20mm. And bearing with clearance of 0.04-0.06 mm, drive shaft and the driven shaft to adopt rolling bearing is connected with the side, increase the flexibility of the chain plate and also avoid the tail wheel and the tail shaft friction, increase the service life, can also reduce load of drive motor, bearing the domestic famous brand, model UCFU.