Service intended
P542 and P543 series are designed for a local reading of measured pressure and equipped with the electrical contact block which allows all the combinations of contacts to be used. The contact block is mounted on the dial. The window is fitted with a knob for external adjustment of the set points. These are also designed to direct the leakage of insulating oil inside the electric cable.
Nominal diameter
100 and 150 mm
Accuracy
±1.0% of full scale
Scale Range (MPa, kPa, bar)
-0.1 ~ 0.6 MPa to -0.1 ~ 1 MPa
-0.1 ~ 0.3 MPa
Working pressure
Steady : 75% of full scale value
Over range protection : 130% of full scale
Working temperature
Ambient : -40 ~ 65°C
Fluid : Max. 100°C
Degree of protection
EN60529/IEC529/IP67
Temperature effect
Accuracy at temperature above and below the reference temperature (20℃) will be effected by approximately ±0.4% per 10℃ of full scale
Pressure connection
Stainless steel (316SS)
Threaded entry, radial
Element
Stainless steel (316SS)
C type bourdon tube
Case
Nickel plated zinc for 100 mm (P542)
Triple setpoint only 316SS 100 and 150 mm (P543)
Cover
Nickel plated zinc for 100 mm
Triple setpoint only 316SS 150 mm (P543)
Window
Safety glass
Movement
Stainless steel
Dial
White aluminium with black graduations
Pointer
BsT3 alloy, black painted pointer with gold plated
Contact
Contact : Dual set point or triple set point
Contact rating : AC 110 V, 0.5 A/AC 220 V, 0.25 A
Dielectric strength : AC 2,000 V/min insulation
Insulation resistance : More than 100 MΩ at DC 500 V
Process connection
⅜" PF
Contact supplier